BlueprintCalcs 2D Parametric Trade Tools

Epoxy Resin Calculator

To calculate epoxy resin volume, multiply length by width by depth in inches to obtain total cubic inches, then divide by 231 for gallons or multiply by 0.554 for fluid ounces. Add a 5% leveling margin, then separate Part A resin and Part B hardener according to manufacturer mix ratios.

2D Casting CAD Blueprint | River Table & Epoxy Volume
✓ Safe Exotherm Depth
TABLETOP CASTING PLAN (TOP VIEW) WOOD SLAB WOOD SLAB EPOXY RIVER 1005.4 fl oz 48" LENGTH 24" CROSS-SECTION & MIX RATIO 1.5" Depth PART A: RESIN 670.3 oz (5.24 Gal) + PART B: HARDENER 335.1 oz (2.62 Gal) TOTAL VOLUME REQUIRED (INCL. 5% OVERFILL): 7.85 Gallons (1005.4 fl oz) RECOMMENDED KIT PURCHASE: 3x 3-Gallon Commercial Casting Kits (9 Gal Total) EXOTHERM MAX DEPTH: 2.5" Single Pour
● Calculated at 231 cubic inches per US liquid gallon with 5% leveling meniscus waste.
Total Required: 7.85 Gal
TOTAL GALLONS 7.85 Gal Incl. 5% Waste
PART A RESIN 670.3 oz Component A
PART B HARDENER 335.1 oz Component B
MAX DEPTH 2.5" Single Pour Exotherm Check

Casting Dimensions

ASTM D2471 Exotherm
5% Overfill
Epoxy Takeoff & Purchasing 7.85 Gal Total
Part A (Resin):
670.3 fl oz (5.24 Gal)
Part B (Hardener):
335.1 fl oz (2.62 Gal)
Total Liquid Volume:
1005.4 fl oz (7.85 Gallons)
Raw Cubic Inches:
1728 cu in
Recommended Kit:
3x 3-Gallon Commercial Casting Kits (9 Gal Total)

Epoxy Resin Chemistry: 2:1 Deep Pour vs. 1:1 Tabletop Systems

Casting polymer epoxy resin is a chemical discipline transforming liquid monomers into rigid thermoset plastic through exothermic cross-linking polymerization. When Part A (epoxide prepolymer) mixes with Part B (polyamine hardener), covalent bonding releases thermal energy as heat.

Selecting the proper epoxy formulation for your project's volume and depth prevents casting defects:

  • 2:1 Deep Pour Casting Resins: Formulated with modified cycloaliphatic amines that slow reactivity. Gel time spans 18 to 24 hours, reaching full cure in 48 to 72 hours. This delay allows air bubbles to escape while maintaining lower exothermic temperatures for single pours up to 2.5 to 3.0 inches thick.
  • 1:1 Tabletop & Surface Resins: Engineered with fast aliphatic polyamines that skin over in 30 to 45 minutes and cure within 12 to 24 hours. Because the reaction accelerates quickly, heat cannot dissipate through thick sections. Pours must stay within 0.125" to 0.25" maximum depth to prevent runaway exotherm.

Epoxy Volume & Square Foot Coverage Quick Reference

Kit Size Total Fluid Ounces Cubic Inches 1/8" Surface Coat Coverage 1.5" Deep Pour Coverage
32 oz (Quart Kit) 32 fl oz 57.7 cu in 3.2 sq ft 0.27 sq ft (Small coaster)
1 Gallon Kit 128 fl oz 231.0 cu in 12.8 sq ft 1.07 sq ft (Charcuterie void)
1.5 Gallon Kit 192 fl oz 346.5 cu in 19.2 sq ft 1.60 sq ft (End table river)
3 Gallon Kit 384 fl oz 693.0 cu in 38.5 sq ft 3.21 sq ft (Standard Coffee Table)

Contractor Protocol: Mold Release, Tuck Tape & Leak Prevention

Epoxy resin bonds tightly to wood, steel, glass, and concrete. Common materials epoxy will not adhere to include polyethylene plastic (Tyvek / Tuck Tape) and silicone:

  • Melamine & Sheathing Tape Mold: Build the casting box from 3/4" melamine. Cover interior surfaces with overlapping strips of polypropylene Tuck Tape. Smooth seams flat with a plastic roller.
  • 100% Silicone Perimeter Bead: Seal all mold seams with clear silicone caulk. Allow caulk to cure for 2 hours minimum before pouring. Warm epoxy easily flows through micro pinholes.
  • Clamp Wood Slabs Down: Dry wood floats in liquid epoxy. Clamp tape-wrapped 2x4 cauls across the slab tops before pouring to hold slabs flat against the mold base.

Frequently Asked Questions: Epoxy Casting & Finishing

How do you calculate how much epoxy resin you need? ↓

To calculate epoxy resin volume: multiply Length (inches) × Width (inches) × Depth (inches) to find total cubic inches. Divide total cubic inches by 231 to convert to US gallons, or multiply cubic inches by 0.554 to find fluid ounces. Add 5% to 10% to account for mixing cup residue, wood absorption, and self-leveling meniscus waste.

What is the difference between 2:1 and 1:1 epoxy resin? ↓

A 2:1 epoxy system (two parts resin to one part hardener) is an ultra-low viscosity, slow-curing formula engineered for deep pour castings between 1.0 and 3.0 inches thick. It cures over 48 to 72 hours, releasing exothermic heat slowly to prevent cracking. A 1:1 epoxy system cures rapidly (12 to 24 hours) with high exothermic heat and is restricted to thin surface flood coats up to 0.25 inches.

What is exothermic thermal runaway in epoxy casting? ↓

Epoxy curing is a heat-generating chemical reaction. If you pour fast-curing 1:1 resin too deep (>0.25") or mix too much volume in a confined bucket, heat cannot escape. The mixture can exceed 300°F (150°C), resulting in thermal runaway where the epoxy boils, turns yellow, cracks, smokes, and can melt plastic molds.

How much epoxy do I need for a 48 x 24 river table? ↓

If the total mold is 48" × 24" × 1.5" and live edge wood slabs occupy roughly 60% of the area, the epoxy river void occupies ~40% (approx 691 cubic inches). This requires roughly 3.0 gallons (384 fluid ounces) of mixed 2:1 deep pour resin. If casting a solid clear slab of that size, it requires 7.5 to 7.8 gallons.

Why do I need to seal live edge wood before pouring deep epoxy? ↓

Raw timber is porous and contains thousands of microscopic air pockets. When warm epoxy is poured over raw wood, expanding air bubbles rise continuously into the curing resin, becoming permanently trapped. Brushing a thin "seal coat" of fast 1:1 epoxy over the wood 4 to 6 hours prior creates an impermeable barrier that eliminates outgassing.

How do I pop surface bubbles in curing epoxy? ↓

Ten to fifteen minutes after pouring and spreading the epoxy, pass a propane torch or heat gun 6 to 8 inches above the liquid surface with rapid sweeping motions. The carbon dioxide (CO2) and heat from the flame rapidly lower surface tension, causing microscopic micro-bubbles to instantly burst without scorching the resin.

Workshop & CAD Calculators

Related Layout Tools

View Full Workshop & Automotive CAD Hub 12 Tools →