Amp Hours to Watt Hours Calculator
To convert Amp-Hours to Watt-Hours, multiply battery Amp-Hours by nominal voltage: Wh = Ah × V. For example, a 100Ah 12V battery yields 1,200 Watt-Hours (1.2 kWh). Divide total Watt-Hours by 1,000 to convert into Kilowatt-Hours for solar energy storage.
Conversion Inputs & Voltage
Direct Wh = Ah × VUnderstanding the Difference Between Amp-Hours and Watt-Hours
In the solar and battery storage trades, confusion between Amp-Hours (Ah) and Watt-Hours (Wh) is the single most common cause of under-budgeted power systems. Understanding the physics behind these units prevents costly mistakes:
Amp-Hours Measure Coulombs of Charge, Not Energy
An Amp-Hour measures the flow of electrical charge over time (1 Ah = 3,600 Coulombs). However, charge alone cannot perform work without electrical potential (pressure), which is Voltage. To calculate the actual kinetic work or energy capable of running a light bulb, heater, or motor, charge must be multiplied by voltage (Wh = Ah × V).
Comparing Batteries Across Different Voltages
If an installer offers you a 100Ah 12V battery for $300 and a 100Ah 48V battery for $1,000, the 48V battery is actually significantly cheaper per unit of stored energy! The 12V battery provides 1,200 Wh (\$0.25/Wh), whereas the 48V battery stores 4,800 Wh (\$0.208/Wh). Always normalize battery capacity into Watt-Hours before making purchasing decisions.
Universal 100Ah Battery Energy Across Nominal DC Voltages
| Battery Voltage | Capacity (Ah) | Stored Energy (Wh) | Stored Energy (kWh) | Common Application |
|---|---|---|---|---|
| 3.2V DC (Single Cell) | 100 Ah | 320 Wh | 0.32 kWh | Raw LiFePO4 Prismatic Cell |
| 12.8V DC (4S Pack) | 100 Ah | 1,280 Wh | 1.28 kWh | RV, Camper Van, Trolling Motor |
| 25.6V DC (8S Pack) | 100 Ah | 2,560 Wh | 2.56 kWh | Off-Grid Cabin, Medium Solar |
| 51.2V DC (16S Pack) | 100 Ah | 5,120 Wh | 5.12 kWh | Server Rack Battery, Whole-Home ESS |
Engineering Principles: Converting Amp-Hours to Watt-Hours in Battery Systems
Voltage Sag & Operating Nominal Curves
In real-world battery operations, terminal voltage is not static. A standard 12V lead-acid battery rests at 12.6V fully charged, drops to 12.0V under steady load, and reaches cut-off near 10.5V. When calculating Watt-Hours using nominal voltage (12.0V), you establish an accurate baseline for energy storage capacity. However, high discharge rates (such as high C-rates exceeding 0.5C) cause increased internal resistive heating and significant voltage sag, diminishing actual delivered Watt-Hours according to Peukert's law.
LiFePO4 Flat Voltage Advantage
Lithium Iron Phosphate (LiFePO4) chemistry exhibits an extraordinarily flat discharge plateau. A 4S lithium pack delivers nearly 85% of its total energy between 13.2V and 12.8V before rapidly declining. Because the operating voltage remains elevated across the entire discharge cycle, LiFePO4 batteries deliver practically 100% of their calculated Watt-Hour rating under high loads, unlike flooded or sealed AGM lead-acid counterparts which suffer severe capacity reduction under continuous high amperage draws.
Frequently Asked Questions About Ah to Wh Conversion
How do you convert Amp-Hours to Watt-Hours? ↓
To convert Amp-Hours to Watt-Hours, multiply the Amp-Hour rating by the battery's nominal DC voltage: Watt-Hours = Amp-Hours × Volts. For example, a 100Ah 12-Volt battery provides 100 × 12 = 1,200 Watt-Hours (or 1.2 Kilowatt-Hours) of total stored energy.
How many Watt-Hours is a 100Ah 12V battery? ↓
A 100Ah 12V battery holds 1,200 Watt-Hours (1.2 kWh) of nominal energy. If it is a Lithium LiFePO4 battery, approximately 90% (1,080 Wh) is usable. If it is an AGM or flooded lead-acid battery, only 50% (600 Wh) is usable to prevent permanent chemical damage.
Why does voltage matter when comparing battery Amp-Hours? ↓
Amp-Hours only measure electrical charge, not total energy. A 100Ah 12V battery provides 1,200 Watt-Hours, whereas a 100Ah 48V battery provides 4,800 Watt-Hours—four times the energy despite having the exact same Amp-Hour number. Watt-Hours is the only valid metric for comparing batteries of differing voltages.
How do I convert milliamp-hours (mAh) to Watt-Hours? ↓
Divide the milliamp-hour (mAh) figure by 1,000 to convert to Amp-Hours, then multiply by nominal voltage: Wh = (mAh / 1,000) × V. For example, a 5,000mAh smartphone battery operating at 3.7V nominal provides (5,000 / 1,000) × 3.7 = 18.5 Watt-Hours.
Related Layout Tools
Solar Panel Tilt Angle Sizer
Fixed, winter, and summer solar tilt angles by latitude with roof pitch slope compensation.
Battery Runtime & Load Sizer
Runtime hours for LiFePO4, AGM, and Lead-Acid chemistries under depth of discharge.
Off-Grid Solar Daily Wh Estimator
Size solar arrays, daily watt-hour budgets, peak sun hours, and battery bank autonomy.
Watt Hours to Amp Hours Tool
Convert stored energy from Wh and kWh to required Amp-Hours for battery bank sizing.