BlueprintCalcs 2D Parametric Trade Tools

Inverter Size Calculator

To calculate inverter size, sum the continuous running wattage of all simultaneous appliances and multiply by 1.25 for safety headroom. For motorized loads, multiply compressor running wattage by 3.0 to determine required peak surge capacity before selecting a pure sine wave inverter.

INVERTER & MOTOR SURGE CAD SCHEMATIC
1500W Cont. • 3000W Surge Peak
PURE SINE WAVE INVERTER CHASSIS 1500W Continuous Output (120V / 240V AC) <3% THD Low Harmonic Clean Grid Power Peak Motor LRA Surge Headroom: 3000W Peak DC BATTERY IN 12V DC Continuous Draw: 113.2A Class T Fuse: 150A Fuse AC LOADS Running Load: 1200W Required Surge: 2400W Motor Surge Factor: 3× Sizing Formula: Inverter Continuous = Load (1200W) × 1.25 Headroom = 1500W Pure Sine Recommended DC Cable: 1/0 AWG Cu (Max 8.7 ft for <2% Voltage Drop)
✦ Inverter Engine: 1500W Pure Sine Inverter (3000W Surge)
DC Draw: 113.2A Fuse: 150A Cable: 1/0 AWG Cu
Inverter Size 1500W Continuous
Surge Rating 3000W Peak LRA
DC Draw 113.2A At Full Load
DC Fuse 150A Class T Rating
⚠ Inductive motor detected (600W). Always select a Pure Sine Wave inverter to prevent motor overheating and capacitor buzz.

Load Wattage & Surge Parameters

NEC 125% Headroom
1,200 Watts
100W (Small) to 8,000W (Heavy House)
600 Watts
0W (Resistive only) to 3,000W (Well Pump)
Inverter & Fusing Specification 1500W Pure Sine
Recommended Inverter:
1500W Continuous
Surge Peak Capacity:
3000W (Calculated 2400W)
Continuous DC Amps:
113.2A DC
Recommended Fuse:
150A Class T / ANL
Battery Cable Gauge:
1/0 AWG Cu
Max Cable Distance:
8.7 ft (<2% drop)

How to Accurately Size a Pure Sine Wave Inverter

An undersized inverter will trip its internal overcurrent protection the split-second a refrigerator compressor or circular saw starts up. Conversely, a massively oversized inverter wastes battery power through high parasitic idle draw. Follow this 4-step contractor method:

1

Factor Continuous Operating Headroom (1.25 Multiplier)

Inverters are rated at 25°C (77°F). In a real-world van, garage, or off-grid cabin where ambient temperatures exceed 90°F, MOSFET transistors suffer thermal derating. Running an inverter at 90% to 100% continuous duty triggers aggressive cooling fan noise and thermal throttling. Applying a 1.25 safety factor ensures continuous loads remain within the sweet spot of 70% to 80% inverter capacity. This prevents nuisance thermal cut-offs during high ambient summer conditions.

2

Calculate Locked Rotor Amps (LRA) Surge

Inductive AC motors (found in refrigerators, freezers, air conditioners, and well pumps) require an enormous inrush current to overcome static rotor inertia and establish a magnetic field. This inrush current lasts 100 milliseconds to 2 seconds and pulls 2.5× to 3.5× the motor's running wattage. If your inverter cannot deliver this burst surge, the voltage will sag below 10.5V, triggering an instant low-voltage fault. Always check manufacturer specifications for peak 5-second surge wattage ratings before commissioning hardware.

3

Pure Sine Wave vs Modified Sine Wave Waveforms

Modern electronics, speed-controlled brushless tools, medical CPAP devices, and microwave ovens require clean, total harmonic distortion (THD under 3%) pure sine wave alternating current. Modified sine wave units produce stepped square waves that cause synchronous motors to overheat, generate loud acoustic buzzing, and destroy digital microprocessor control boards.

4

Select Battery Bus Voltage to Control High DC Amperage

Ohm's Law dictates that Power equals Voltage times Current. Supplying 3,000 Watts from a 12-Volt battery bank requires an astronomical 278 Amps of continuous DC draw, necessitating heavy 4/0 AWG welding cables and generating significant thermal losses. Stepping up to a 24-Volt or 48-Volt architecture drops continuous current down to 69 Amps, allowing thinner #4 AWG conductors, lower voltage drop, and safer overall operation.

Common Household Appliances: Continuous vs Surge Wattage

Appliance Running Watts Startup Surge Watts Surge Multiplier Minimum Inverter Size
Residential Refrigerator (18 cu ft) 150 Watts 1,200 Watts 8.0× (LRA) 1,500W Pure Sine
Microwave Oven (1,000W cooking) 1,400 Watts 2,100 Watts 1.5× (Magnetron) 2,000W Pure Sine
Coffee Maker (Drip / Keurig) 1,200 Watts 1,200 Watts 1.0× (Resistive) 1,500W Pure Sine
1/2 HP Submersible Well Pump 900 Watts 3,150 Watts 3.5× (Capacitor Start) 3,500W – 4,000W Pure Sine
Circular Saw (15 Amp 7-1/4") 1,800 Watts 4,000 Watts 2.2× (Universal Motor) 3,000W – 4,000W Pure Sine

Solar Inverter Sizing & Surge Capacity Frequently Asked Questions

What size inverter do I need to run a refrigerator? ▼

A standard modern refrigerator consumes between 100W and 200W while running, but demands a 1,000W to 1,500W surge for 1 to 2 seconds when the compressor kicks on. A minimum 1,500-Watt pure sine wave inverter is recommended to cleanly handle the inductive starting surge without tripping low-voltage protection.

What is the difference between continuous watts and surge watts on an inverter? ▼

Continuous wattage is the maximum power an inverter can deliver indefinitely without overheating. Surge wattage (peak wattage) is the burst power an inverter can output for a very brief duration (typically 1 to 5 seconds) to start inductive electric motors like well pumps, air compressors, and microwave magnetrons.

Should I buy a Pure Sine Wave or Modified Sine Wave inverter? ▼

You should always select a Pure Sine Wave inverter. Modified sine wave inverters produce harsh, stepped square-wave electricity that causes inductive motors to run hot, produces loud audible humming in audio equipment, and can permanently damage modern variable-speed appliances, CPAP machines, and laptop power bricks.

How do I calculate the DC fuse size for an inverter? ▼

Divide continuous inverter wattage by nominal battery voltage and inverter efficiency, then multiply by 1.25 for NEC continuous compliance: Fuse Amps = (Inverter Watts / [Battery Volts × Efficiency]) × 1.25. For example, a 1,500W 12V inverter (90% efficient) requires (1,500 / [12 × 0.90]) × 1.25 = 173.6A, necessitating a 175A or 200A Class T fuse.

Solar & Power Calculators

Related Layout Tools

View Full Solar & Battery Power Hub 8 Tools →