BlueprintCalcs 2D Parametric Trade Tools

Paver Base Calculator

To calculate paver base, multiply your extended patio footprint (including a 6-inch perimeter overdig) by compacted base depth in feet and divide by 27 for cubic yards. Add 15% compaction allowance, then add 1 inch of ASTM C33 bedding sand over the paver area for proper load distribution.

PAVER BASE EXCAVATION PROFILE CAD
✓ Meets ICPI Patio Spec (4"+ Base)
Click to Expand ⛶ DETAIL A: ICPI EDGE RESTRAINT & OVERDIG 3.0X Compacted Base (Crusher Run) Non-Woven Geotextile (6-8 oz) 1" Bedding Sand (ASTM C33) Concrete Paver Rigid Edge 10" Spike @ 12" OC 6" Base Overdig Compact Subgrade (Verify Soft Spots) 4" Compacted Base (21A / DGA) 1.0" C33 Bedding Sand Concrete Pavers (2.375") 7.4" Dig Depth Width: 15' 0" 6" Overdig 6" Overdig
MATERIAL TAKEOFF: Base: 7.16 Tons (4.77 yd³) | Sand: 1.35 Tons (1 yd³)

Sub-Base Parameters

ICPI Tech Spec 2
Quick Presets:
Footprint Shape
Application Duty
20' 0"
15' 0"
4.0" Compacted
1.0" Bed
ICPI Sub-Base & Sand Takeoff ICPI Tech Spec 2
Base Aggregate (Crusher Run): 7.16 Tons
Base Volume (+15% compact): 4.77 yd³ Bedding Sand (ASTM C33): 1.35 Tons
Total Dig Depth to Subgrade: 7.38" Deep
GEOTEXTILE FABRIC 387 Sq Ft
POLYMERIC JOINT SAND 4 Bags

Five Layers of an Interlocking Paver System

Unlike poured concrete, interlocking concrete pavers transfer loads laterally into a compacted stone base. Rutting and edge spread occur when crews skimp on base thickness, lift compaction, or edge restraint. Build five layers:

  1. Native Subgrade: Strip topsoil, grade a 1.5%-2.0% slope away from structures, and compact until firm (jumping jack or trench roller on clay; plate compactor on sand).
  2. Geotextile Fabric: Roll 6-oz to 8-oz non-woven geotextile fabric (Class 1-2) with 12" overlaps to separate clay from aggregate.
  3. Dense Graded Aggregate Base: Compact 4"-6" crusher run (ASTM D2940) for patios, or 8"-12" for drives in 4" max lifts (2 lifts for 8", 3 lifts for 12").
  4. Bedding Sand Course: Screed a uniform 1.0" layer of washed concrete sand (ASTM C33) loose without pre-compacting.
  5. Pavers & Polymeric Sand: Set pavers, anchor edge restraint, and sweep dry polymeric sand into joints.

Sub-Base Material Specifications & Density Table

Layer Spec Depth Allowance Density Field Rule
Patio Base Crusher Run (ASTM D2940) 4"-6" 15% Compaction 1.50 T/yd³ Compact in 4" max lifts
Drive Base Crusher Run (ASTM D2940) 8"-12" 15% Compaction 1.50 T/yd³ Reversible plate compactor (5,000+ lbf centrifugal force) or trench roller
Bedding Sand Washed Concrete Sand (ASTM C33) 1.0" 8% Screed & Seating 1.35 T/yd³ Screed over 1" pipes; never pre-compact
Joint Sand Polymeric Sand 1/8" Gap Round Up ~85 sq ft/bag Blow pavers clean before misting

The 6-Inch ICPI Overdig Rule

Digging to the exact finished patio size leaves border pavers unsupported. Per ICPI Tech Spec 2, extend compacted base stone at least 6 inches past the paver edge on all exposed sides (+12" to length and width). This overdig shoulder anchors 10-inch spiral spikes every 12"-18" in solid stone instead of soft soil.

How to Calculate Paver Base Depth & Sand: 5 Steps

Step 1: Measure Extended Excavation Area

Measure length and width in feet, then add a 6-inch perimeter overdig (12 inches total) so spike-anchored edge restraint sits on stone. Example 20x15 patio: 21 x 16 ft = 336 sq ft.

Step 2: Calculate Total Excavation Depth

Sum compacted base depth (4" patio, 8" drive), 1.0" bedding sand, and paver thickness (2.375" for 60mm, 3.125" for 80mm). Default patio cut: 7.38 inches.

Step 3: Size Dense Graded Base Tonnage

Multiply extended base area by depth in feet, divide by 27 for cubic yards, add 15% compaction allowance, and multiply by 1.50 tons/yd3 (336 sq ft x 0.333 ft / 27 x 1.15 = 4.77 yd3, or 7.16 tons).

Step 4: Estimate ASTM C33 Bedding Sand

Multiply paver area (excluding overdig) by sand depth in feet, divide by 27, add 8% screed and seating allowance, and multiply by 1.35 tons/yd3 (300 sq ft = 1.00 yd3, 1.35 tons bulk, or ~54 fifty-lb bags).

Step 5: Determine Polymeric Joint Sand Bags

Divide paver square footage by 85 sq ft per 50-lb polymeric sand bag and round up (300 sq ft = 4 bags).

1-Inch Conduit Screeding Protocol

  • Set Pipes: Space two 1" O.D. galvanized EMT conduits 6 to 8 ft apart on compacted stone.
  • Screed Sand: Shovel damp ASTM C33 sand between pipes and pull a straightedge across for a flat 1.0" bed.
  • Lay & Compact: Pull pipes, trowel-fill tracks, lay pavers from atop installed stones, lock restraints, and run a pad-equipped plate compactor over dry joints.

Contractor Field & Site-Safety Notice

  • Call 811 First: Request utility locates 48-72 hours before digging, and hand-pot near private irrigation, pool, lighting, or septic lines.
  • Scale Tickets & Moisture: Aggregate weight runs 1.35-1.65+ tons/yd³ by geology and moisture; verify billed weight on quarry scale tickets.
  • Geotech & Inspector Review: Consult a geotechnical engineer or building inspector on expansive clay, frost heave, or heavy axle loads.
  • Permits & Drainage: Confirm municipal impervious-cover permits and pitch subgrade 1.5%-2.0% away from structures.

Frequently Asked Questions About Paver Base Depth

How deep should a paver patio base be? +
Over stable soil, ICPI specs call for at least 4 inches of compacted dense graded aggregate (crusher run), 1 inch of bedding sand, and 2-3/8 inch (60mm) pavers, for ~7-3/8 inches total excavation depth.
How deep should a paver driveway base be? +
A paver driveway needs 8 to 12 inches of compacted crusher run in 4-inch max lifts (2 lifts for 8 inches, 3 lifts for 12 inches), 1 inch of ASTM C33 bedding sand, and 3-1/8 inch (80mm) pavers.
What type of sand goes under pavers? +
Use coarse, angular washed concrete sand meeting ASTM C33. Skip masonry sand, play sand, and stone dust because rounded fines trap water and shift under freeze-thaw loads.
Why is a 6-inch base overdig needed? +
Extending compacted stone 6 inches past the paver edge gives the 10-inch spiral spikes holding your edge restraint solid aggregate bearing instead of soft topsoil.
Can crusher run or stone dust replace bedding sand? +
No. Stone dust and crusher run hold water right under the pavers, causing frost heave in winter and blocking drainage into the base.
Materials & Masonry Calculators

Related Layout Tools

View Full Hardscape & Masonry Hub 10 Tools →