BlueprintCalcs 2D Parametric Trade Tools

Retaining Wall Calculator

To calculate retaining wall blocks, multiply total wall height (exposed height plus minimum 6-inch buried course) by length in feet, divide by block face area, and add 5% waste. Include 6 inches of compacted crusher run leveling pad and a 12-inch drainage gravel chimney per NCMA guidelines.

RETAINING WALL ELEVATION & STEPPING CAD
⚠ Geogrid + PE Design / Permit Likely Required
Click to Expand ⛶ DETAIL A: NCMA LEVELING PAD & DRAIN 3.0X 6" Compacted Crusher Run Base Buried Starter Min 6" Embedment Finished Front Grade 4" Perf Pipe Slope to daylight Retained Soil Mass (6" Compacted Lifts) 12" #57 Drain Gravel 6" Compacted Leveling Pad (Crusher Run Aggregate) Finished Front Grade Exp: 3.5' 0" Buried: 6"
TAKEOFF: 194 Blocks | 5.51 Tons #57 Stone | 1.82 Tons Base

Retaining Wall Parameters

NCMA SRW
Quick Presets:
Block Classification
30' 0"
3.5' Exposed
Hillside Surcharge / Slope
Include Universal Cap Stones 3" Architectural coping layer
NCMA SRW Material Takeoff Landscape 6"x16"x10"
Total Blocks (+5% waste): 194 Blocks
Exposed Courses: 7 Courses Buried Starter: 1 Course (6")
Cap Stones: 25 Caps Total Wall Weight: 3.10 Tons (6,208 lbs)
DRAINAGE GRAVEL (#57) 5.51 Tons (4.08 yd³)
GEOGRID REINFORCEMENT Gravity Wall (None)

Gravity Walls vs. Geogrid Reinforcement

A segmental retaining wall built with dry-stacked ASTM C1372 blocks resists lateral soil pressure while flexing slightly with freeze-thaw cycles.

  • Unreinforced Gravity Walls (< 4.0 ft Total Height): Dead block weight, rear interlock, and a 3/4-inch per foot setback batter resist tipping on flat, stable soil (check local 3-foot permit thresholds).
  • Geosynthetic Reinforced Walls (4.0 ft+ or Surcharged): At 4.0 ft total height or under a sloped hillside or driveway surcharge load, uniaxial geogrid ties between courses and extends back at least 60% of total height.

Block Sizes, Face Areas, and Weights

Block Class Size (H × W × D) Face Area Unit Weight Unreinforced Limit Typical Use
Commercial 8x18 8" × 18" × 12" 1.00 sq ft 75 - 80 lbs 3.5 - 4.0 ft unreinforced; >=4.0 ft requires PE geogrid Commercial cuts, terraced grades (with PE geogrid)
Landscape 6x16 6" × 16" × 10" 0.67 sq ft 30 - 35 lbs 3.5 - 4.0 ft max (flat crest) Patio terraces, yard grading, steps
Garden 4x12 4" × 12" × 8" 0.33 sq ft 16 - 20 lbs 2.0 - 2.5 ft max Low borders, flower beds, tree rings

NCMA Embedment Depth, Leveling Pad, and Drainage

Saturated backfill weighs over 85 lbs/ft³ (vs. 35 lbs/ft³ dry), so every wall needs frost-safe embedment and drainage to relieve hydrostatic pressure:

  1. Embedment Depth: Bury 1 inch per foot of wall height, minimum 6 inches or 1 full buried course (12 inches on sloped front toes).
  2. 6-Inch Leveling Pad: Tamp crusher run aggregate 12 inches wider than the block depth in compacted lifts to 95% Proctor density, and set starter blocks level.
  3. 12-Inch Drainage Gravel & Filter Fabric: Place washed #57 drainage gravel behind blocks over a 4-inch perforated drain pipe sloped 1% to daylight, wrapped in non-woven filter fabric, and glue cap stones with masonry adhesive.

How to Calculate Retaining Wall Blocks & Gravel: 5 Steps

Step 1: Measure Wall Length and Exposed Height

Measure linear feet along the wall face and exposed height from finished front grade to the top course (e.g., 30 ft long by 3.5 ft exposed).

Step 2: Determine Buried Starter Course Embedment

Apply NCMA embedment depth: 1 inch buried per foot of wall height, minimum 6 inches or 1 full buried course (3.5 ft exposed on 6x16 blocks = 8 total courses).

Step 3: Calculate Retaining Wall Blocks with 5% Waste

Divide length by block width in feet (30 / 1.333 = 23 blocks/row), multiply by 8 courses (184 blocks), and add 5% waste for cuts (194 blocks).

Step 4: Size Cap Stones and Masonry Adhesive

Divide length by 16-inch cap width with 5% waste (25 cap stones) and add 1 tube of polyurethane masonry adhesive per 15 linear feet (2 tubes).

Step 5: Estimate Leveling Pad and Drainage Gravel Cubic Yards

Calculate trench cubic yards (L x W x 0.5 ft / 27) plus 15% compaction for crusher run (1.82 tons), and size a 12-inch drainage gravel chimney at 1.35 tons/yd³ (5.51 tons).

Engineering, Permit & Excavation Notice

  • Permits & PE Design: Walls 4 ft or taller in total height including the buried course (3 ft in stricter cities), or walls supporting slopes, driveways, parking pads, pools, or building footings require permits, PE-stamped plans, and engineered geogrid.
  • Call 811 Before You Dig: Request public utility locates 48 to 72 hours ahead, and hand-pot near irrigation, pool, lighting, or septic lines.
  • Soil & Inspector Check: Verify soil bearing capacity, frost depth, and drain daylighting with your local building inspector or geotechnical engineer.

Frequently Asked Questions About Retaining Walls

How many retaining wall blocks do I need? +
Multiply wall length by total height (exposed height plus the buried course), divide by block face area (0.67 sq ft for 6x16; 1.00 sq ft for 8x18), and add 5% to 10% for cuts.
How deep should the buried course be under a retaining wall? +
NCMA guidelines call for 1 inch of embedment depth per foot of wall height, with a 6-inch (1 full course) minimum below grade, or 12 inches if soil slopes down in front.
When does a retaining wall require geogrid reinforcement and a permit? +
Walls 4 feet or taller in total height (including the buried course), or 3 feet locally, plus walls carrying a sloped hillside, driveway, or footing surcharge load typically require permits, PE plans, and uniaxial geogrid reinforcement.
Why place drainage gravel and a perforated drain pipe behind blocks? +
Trapped groundwater doubles soil load and builds hydrostatic pressure. A 12-inch column of washed #57 drainage gravel in non-woven filter fabric routes water to a 4-inch perforated drain pipe pitched to daylight.
What base material goes in the leveling pad trench? +
Never pour concrete under dry-stacked segmental retaining wall blocks because rigid slabs crack from frost heave. Compact a 6-inch crusher run leveling pad 12 inches wider than block depth in thin compacted lifts.
Materials & Masonry Calculators

Related Layout Tools

View Full Hardscape & Masonry Hub 10 Tools →